Materials · Fitting material
Gray PVC is the most common material for the bulkhead fittings, valves, fill lines and vents we install on plastic storage tanks. It is economical, easy to repair and resists a wide range of water treatment chemicals, acids, bases and salts.
Every PVC pipe nipple, fitting and valve that carries liquid on our tanks is Schedule 80 (dark gray), not the white Schedule 40 sold for home plumbing and irrigation. Both have the same outside diameter, but Schedule 80 has a thicker wall and a higher pressure rating at every size. That matters on a tank because bulkhead nipples, fill lines and drain lines are threaded: pipe makers say to thread only Schedule 80 or heavier, since Schedule 40 does not have enough wall to thread, and even Schedule 80 loses half its pressure rating once threaded. On a tank of acid or caustic, a thin fitting that cracks is a chemical spill, so we do not use Schedule 40. The one exception is the screened U-vent on top of the tank, which we make from lightweight DWV (drain, waste and vent) PVC, because a vent carries no pressure. (Source: Westlake Pipe & Fittings, Schedule 40 vs Schedule 80 PVC; GF Piping Systems, PVC Schedule 80 pipe specification)
Ratings from the Bailiff chemical compatibility chart. Click a chemical for its full ratings across tank resins, fittings, gaskets and metals.
Ratings are a general guide. Chemical resistance depends on temperature, concentration, mixtures and exposure time. Contact us before storing any chemical rated Fair or Not Recommended, and send us the safety data sheet for a recommendation.