Fittings & Options · Camlocks
A camlock (cam and groove) fitting connects a hose to a tank in seconds, with no tools: push the grooved male end into the female coupler and pull the two cam arms down to lock it. We install camlocks on fill lines and outlets so a tanker hose or transfer hose can hook up quickly and cleanly.
On chemical tanks we use polypropylene camlocks. Polypropylene is light, does not rust or corrode, and handles many acids, caustics and salt solutions. Check your chemical against polypropylene in our chemical compatibility database, and see polypropylene fittings for temperature limits. The coupler gasket is matched to your chemical (EPDM, Viton® or Buna-N).

Every camlock has one cam end and one connection end. The adapter is the grooved male end; the coupler is the female end with the cam arms. The letter tells you which cam end it has and what is on the other side:
| Type | Cam end | Other end | Typical use |
|---|---|---|---|
| Type A | Male adapter | Female pipe thread (FNPT) | Screws onto a threaded pipe nipple or valve outlet. |
| Type B | Female coupler | Male pipe thread (MNPT) | Screws into a female-threaded port. |
| Type C | Female coupler | Hose shank (barb) | The end of a hose that locks onto a tank adapter. |
| Type D | Female coupler | Female pipe thread (FNPT) | Screws onto a threaded pipe nipple to give a female coupler. |
| Type E | Male adapter | Hose shank (barb) | The end of a hose that plugs into a coupler. |
| Type F | Male adapter | Male pipe thread (MNPT) | Screws into a female-threaded valve, elbow or bulkhead. |
| Type DC | Dust cap | — | Locks over a male adapter (A, E, F) to keep it clean and sealed. |
| Type DP | Dust plug | — | Plugs a female coupler (B, C, D) when no hose is connected. |
Tell us the size and type your hoses or trucks use, and we will match the camlock on the tank.
Need camlocks on your tank?
We install the camlock, valve and bulkhead at our plant so the tank arrives ready to hook up. Request a quote · dmiller@plasticstoragetanks.com
Camlock type designations follow the common cam-and-groove convention used by manufacturers such as Dixon; see for example the camlock technical information and camlock fittings guide.