Double wall tanks
Containment built in: the outer tank holds a leak, with no separate dike to build.
Home › Tank Sizes › 800 Gallon
An 800 gallon tank is short and wide, about 6 feet tall, so it fits under low ceilings and mezzanines where a taller tank will not. Compare 15 tanks in this size, single wall and double wall, from $899.
Choosing a style
Containment built in: the outer tank holds a leak, with no separate dike to build.
The most tank for the floor space, in HDPE for most chemicals and water.
Black and green tanks that block sunlight to help prevent algae.
Drain completely for batching and products that settle. They sit on a stand.
Common uses for a 800 gallon tank:
Sizes, specs and prices
Tap a style to jump to it. Prices are for the tank; fittings are installed to your order.
| Tank | Size (dia. × height) | SG | Color | Price |
|---|---|---|---|---|
| 800 gal HDPE Double Wall Vertical Tank | 64" × 75" | 1.9 SG | White | $3,150 |
| Tank | Size (dia. × height) | SG | Color | Price |
|---|---|---|---|---|
| 800 gal Insulated HDPE Double Wall Vertical Tank | 64" × 75" | 1.9 SG | White | $4,950 |
| Tank | Size (dia. × height) | SG | Color | Price |
|---|---|---|---|---|
| 800 gal HDPE Vertical Tank | 60" × 75" | 1.9 SG | Translucent White | $999 |
| 800 gal HDPE Vertical Tank | 60" × 75" | 2.2 SG | Translucent White | $1,199 |
| Tank | Size (dia. × height) | SG | Color | Price |
|---|---|---|---|---|
| 800 gal HDPE Black Water Tank | 60" × 75" | Water only | Black | $899 |
| Tank | Size (dia. × height) | SG | Color | Price |
|---|---|---|---|---|
| 800 gal Polypropylene Vertical Tank | 60" × 75" | 1.9 SG | Translucent White | $2,099 |
| Tank | Size (dia. × height) | SG | Color | Price |
|---|---|---|---|---|
| 800 gal PVDF Vertical Tank | 60" × 75" | 1.9 SG | Translucent White | $21,990 |
| Tank | Size (dia. × height) | SG | Color | Price |
|---|---|---|---|---|
| 800 gal Insulated HDPE Vertical Tank | 60" × 75" | 1.9 SG | White | $2,668 |
| 800 gal Insulated HDPE Vertical Tank | 60" × 75" | 2.2 SG | White | $2,868 |
| 800 gal Insulated Polypropylene Vertical Tank | 60" × 75" | 1.9 SG | White | $3,768 |
| 800 gal Insulated PVDF Vertical Tank | 60" × 75" | 1.9 SG | White | $23,659 |
| Tank | Size (dia. × height) | SG | Color | Price |
|---|---|---|---|---|
| 800 gal PVDF Flat Top Cone Bottom Tank | 68" × 96" | 1.9 SG | Translucent White | $35,990 |
| Tank | Size (dia. × height) | SG | Color | Price |
|---|---|---|---|---|
| 800 gal HDPE Open Top Cone Bottom Tank | 68" × 96" | 1.9 SG | Translucent White | $1,699 |
| 800 gal Polypropylene Open Top Cone Bottom Tank | 68" × 96" | 1.9 SG | Translucent White | $3,149 |
| 800 gal Lid for HDPE Open Top Cone Bottom Tank | 70" × 6" | NA | Translucent White | Call for price |
Before you order
Vertical tanks in this size run 60″ to 64″ across and 75″ tall. Measure doors, ceilings and the pad, and leave room for fittings and a vent.
Choose an SG rating at or above your liquid’s: 1.5 for liquids up to 1.5 times the weight of water, 1.9 for most acids, caustics and fertilizers, 2.2 for the heaviest.
Double wall versions are 64″ across and 75″ tall, in HDPE. The outer tank holds a leak, with no separate dike to build.
Bulkheads, flanges, valves, vents, top fill lines, insulation and heat tracing, installed in our plant before the tank ships.
Questions
Vertical tanks around 800 gallons that we list are about 60″ to 64″ in diameter and 75″ tall; double wall versions are 64″ across. Exact sizes are in the table and on each tank’s drawing.
About 6,672 pounds of water, plus the tank. At 1.9 SG the liquid alone is about 12,700 pounds. Set it on a flat, solid pad sized for that load.
Bulkheads, flanges, valves, vents, top fill lines, level indicators, insulation and heat tracing, installed at our Willis, Texas plant to the locations you specify before the tank ships.
Match the rating to the heaviest liquid the tank will hold: 1.5 SG for liquids up to 1.5 times the weight of water, 1.9 SG for most acids, caustics and fertilizers, and 2.2 SG for the heaviest. Your liquid’s specific gravity is on its safety data sheet.
Talk to a tank specialist